Home About us Press FAQs Contact Us Testimonials
Search: 


Products
 
 
Address
Industrial Trading Solutions Limited
6 Station Road
Coleshill
Birmingham
B46 1HT

Tel: 01675 465191
Fax: 01675 464429

Click here for GPS directions
Industrial Trading Solutions Ltd GPS Directions
 
 

Toftejorg Sani Magnum Rotary Spray Head.

Print   Print this page      Email   Email to a friend
The Toftejorg Sani Magnum is an efficient replacement for traditional
static spray balls as it uses low volumes of liquid at low pressure. The
device, particularly well-suited to sanitary applications, can be used in
tanks ranging from 5 m3 to 50 m3 (1,300 to 13,000 US gallons).
Working principle
The flow of the cleaning media causes the head of the Toftejorg
Sani Magnum to rotate, with fan jets laying out a swirling pattern
throughout the vessel. This generates a vibrating impact and
cascading flow that covers all internal surfaces of the tank or reactor.
The device's self-cleaning feature is achieved by directing the cleaning
media through the rotating bearing track and onto the neck of the
elongated head.
Standard Design
As standard documentation, the Toftejorg SaniMagnum can be
supplied with a "Declaration of Conformity" for material specifications
or 3.1.B certification for metallic parts. Conformity of Declaration
ATEX directive 94/9/EC available on request. The device is available
in hastelloy C22 (balls in hastelloy C276) with 3.1.B certification for
metallic parts.
ATEX approved, Category 1 for installation in zone 0/20
Materials
Inlet connections: . . . . . . . . . . . . . . .1.4404 (316L)
Bearing race parts: . . . . . . . . . . . . . .SAF 2205 (UNS31803)
Balls: . . . . . . . . . . . . . . . . . . . . . . .1.4404 (316L)/PTFE*
Head: . . . . . . . . . . . . . . . . . . . . . .1.4404 (316L)
(*FDA approved 21 CFR 177.1550)
Ordering
Please specify desired spray pattern, required connections, material
selection and type of certification required. Please also confirm the
application suitable. ** Available on request.
Sizing/Selection and installation drawings are available in Alfa Laval's
Selection Tool for Tank Cleaning Equipment.
Technical Data
Weight: . . . . . . . . . . . . . . . . . . . . .Thread and clip-on: 0.76 kg
(1.48 lbs)
On pipe: 0.97/1.52 kg
(2.14/3.35 lbs)
Lubricant: . . . . . . . . . . . . . . . . . . . .Self-lubricating with the
cleaning fluid
Working pressure: . . . . . . . . . . . . . .1 - 3 bar (14.5 - 44 psi)
Recommended pressure: . . . . . . . . . .2 bar (29 psi)
Max. working temperature: . . . . . . . . .95 C (203 F)
Max. ambient temperature: . . . . . . . .140 C (284 F)
Wetting radius: . . . . . . . . . . . . . . . . .Max. 3 m (10 ft)
Impact cleaning radius: . . . . . . . . . . .Max. effective 2m(6 ft)
Connection: . . . . . . . . . . . . . . . . . .1 1/4" / 1" Rp (BSP) or
NPT thread. Clip-on or
weld-on for pipe: ISO 2037,
ASTM A270, BS4825 part
1, DIN11850 R1, DIN11850
R2, ASME BPE US &
Schedule 40 pipe


Some of our Suppliers
                                                                                                                    
Web Design Birmingham and Search Engine Optimisation (SEO) developed by EvolveNet