Home About us Press FAQs Contact Us Testimonials
Search: 


Products
 
 
Address
Industrial Trading Solutions Limited
6 Station Road
Coleshill
Birmingham
B46 1HT

Tel: 01675 465191
Fax: 01675 464429

Click here for GPS directions
Industrial Trading Solutions Ltd GPS Directions
 
 

Toftejorg Sani Micro Rotary Spray Head.

Print   Print this page      Email   Email to a friend
The Toftejorg Sani Micro is a rotary spray head that uses cleaning
media to provide coverage and impact. The device represents an
effective alternative to traditional static spray balls because it uses low
volumes of cleaning fluid at low pressure. The double ball bearing in
the Toftejorg Sani Micro's rotating head makes the device suitable for
all industrial cleaning applications, including tanks, reactors, vessels
and other containers ranging from 0.05 to 1 m3 (10 - 250 US gallons),
depending on dimensions and cleaning task.
Working principle
The flow of the cleaning media causes the head of the Toftejorg
Sani Micro to rotate, and the fan-shaped jets lay out a swirling pattern
throughout the tank or reactor. This generates the impact needed for
the efficient removal of residual product; the cascading flow covers
all internal surfaces of the vessel.
Standard Design
The Toftejorg SaniMicro is available in Hastelloy C22 and 1.4404 (316).
Materials
Housing, Inlet connection, Head: 1.4404 (316L), Balls: SAF + PTFE.
Technical Data
Weight: . . . . . . . . . . . . . . . . . . . . .75 g (0.2 lbs)
Lubricant: . . . . . . . . . . . . . . . . . . . .Self-lubricating with the
cleaning fluid
Working pressure: . . . . . . . . . . . . . .1 - 3 bar (14.5 - 44 psi)
Recommended pressure: . . . . . . . . . .1 - 2 bar (14.5 - 29 psi)
Max. working temperature: . . . . . . . . .95 C (203 F)
Max. ambient temperature: . . . . . . . .140 C (287 F)
Spray Pattern: . . . . . . . . . . . . . . . .Cleaning pattern 360,
360LF, 270, 270LF,
180D
Max. radius 400 mm (15.7
inch)
Wetting radius: . . . . . . . . . . . . . . . . .Max. radius 1m(3.28 ft)
Min. tank opening: . . . . . . . . . . . . . .25mm(1 inch) diameter (DN
25)
Connection: . . . . . . . . . . . . . . . . . .3/8" Rp (BSP) or NPT
thread, Clip-on or weld-on
for pipe
Ordering
Please specify desired spray pattern, required connections, material
selection and type of certification required. Please also confirm the
application suitability.
Sizing/selection and installation drawings are available in Alfa Laval's
Selection Tools for Tank Cleaning Equipment.
Options
Downpipe assemblies with Tri-Clamp fittings and flange connections.
Certificates
2.2 - 3.1.B - ATEX

Some of our Suppliers
                                                                                                                    
Web Design Birmingham and Search Engine Optimisation (SEO) developed by EvolveNet