Home About us Press FAQs Contact Us Testimonials
Search: 


Products
 
 
Address
Industrial Trading Solutions Limited
6 Station Road
Coleshill
Birmingham
B46 1HT

Tel: 01675 465191
Fax: 01675 464429

Click here for GPS directions
Industrial Trading Solutions Ltd GPS Directions
 
 

Toftejorg Sani Midget Retractor Rotary Spray Head.

Print   Print this page      Email   Email to a friend

The Toftejorg Sani Midget Retractor is a retractable version of the
Toftejorg Sani Midget rotary spray head. The tank cleaning head is
automatically retracted and isolated from contact with the tank or
duct contents when cleaning is complete. Machine components that
come in contact with cleaning media or product are designed to be
self-draining and self-cleaning.
The device is for use in tanks, vessels, dryers, and ducts where internal
components or geometry complicate the placement of permanently
installed cleaning machines. It is suitable for storage tanks, reactors
and mixing tanks between 0.1 and 10 m3 (27 to 2,700 US gallons).
Working principle
The Toftejorg Sani Midget Retractor is available with two styles of
retracting mechanisms: Pneumatic Driven, which uses air pressure to
extend and retract the cleaning head, and Media Driven, which uses
the pressure of the cleaning media to extend the cleaning head and an
integrated spring to retract it. The cleaner head is driven by the media
and starts rotating upon application of media flow, creating fans of
fluid in a swirling pattern. The distribution pattern of the cleaner head
generates a vibrating impact as well as cascading flow coverage of
all internal surfaces of the tank.

Standard Design
The Toftejorg Sani Midget Retractor is available in three stroke lengths:
100 mm, 150 mm and 250 mm, in either pneumatic- or media-driven
versions.
Materials
Product area: . . . . . . . . . . . . . . . . .1.4404 (316L), PEEK*
Non-product area: . . . . . . . . . . . . . .1.4301 (304), POM
Sealing: . . . . . . . . . . . . . . . . . . . . .EPDM
*Polymers FDA-approved 21 CFR 177
Technical Data
Surface finish: . . . . . . . . . . . . . . . . .Product contact surfaces:
Ra=0.8 μm
Weight: . . . . . . . . . . . . . . . . . . . . .See reverse page
Lubricant: . . . . . . . . . . . . . . . . . . . .Self-lubricating with the
cleaning media
Working pressure: . . . . . . . . . . . . . .2 - 5 bar (29 - 73 psi)
Recommended pressure: . . . . . . . . . .2 - 4 bar (29 - 58 psi)
Air supply pressure: . . . . . . . . . . . . .2 - 5 bar (29 - 73 psi)
Air quality: . . . . . . . . . . . . . . . . . . . .Clean, filteredmax. 40 μm.
Dry, dew point max. 10
Max. working temperature: . . . . . . . . .95 C (203 F)
Max. ambient temperature: . . . . . . . .150 C (304 F)
Wetting radius: . . . . . . . . . . . . . . . . .Max. 3.5 m (11 ft)
Impact cleaning radius: . . . . . . . . . . .Max. effective 1.7m(5 ft)
Installation: . . . . . . . . . . . . . . . . . . .Please contact Alfa Laval for
installation of the tank
cleaning machine
Certificate:
2.1
Ordering
Please specify required connections, material selection and type of
certification required and confirm the application suitability.

Some of our Suppliers
                                                                                                                    
Web Design Birmingham and Search Engine Optimisation (SEO) developed by EvolveNet