Home About us Press FAQs Contact Us Testimonials
Search: 


Products
 
 
Address
Industrial Trading Solutions Limited
6 Station Road
Coleshill
Birmingham
B46 1HT

Tel: 01675 465191
Fax: 01675 464429

Click here for GPS directions
Industrial Trading Solutions Ltd GPS Directions
 
 

Alfa Laval SolidC UltraPure Pump

Print   Print this page      Email   Email to a friend
Alfa Logo

When Higher Purity is the Issue

SolidC UltraPure

Applications
Solid C UPThe SolidC UltraPure pump is an efficient and economical centrifugal pump, which meets the requirements of the pharmaceutical industries.
It provides gentle product treatment and is chemically resistant. SolidC UltraPure is available in four sizes, SolidC-1 UltraPure, SolidC-2
UltraPure, SolidC-3 UltraPure and SolidC-4 UltraPure.
 
Standard design
The SolidC UltraPure pump consists of a standard motor, stub shaft,mechanical compression coupling, adaptor, back plate, impeller, pump casing and shaft seal and 45 turned pump casing with standard vertical casing drain ".
 
As standard the SolidC UltraPure is delivered with a 45 outlet (counterclockwise).
 SCUP1
 
The SolidC UltraPure pump is designed for CIP and SIP with emphasis on large internal roundings and cleanable seals.

SolidC UltraPure is supported on four adjustable legs.
 
Shaft seals
The SolidC UltraPure pump is equipped with either an external single or a flushed shaft seal. Both have stationary seal rings in acid-resistant steel AISI 329 with sealing surface in silicon carbide and rotating seal rings in silicon carbide. The secondary seal of the flushed seal is a long lasting lip seal.
 
Materials
Product wetted steel parts: . . . . . . . . .Acid-resistant steel 1.4404 (316L) with material traceability EN.10204.3.1
Other steel parts: . . . . . . . . . . . . . . .Stainless steel 1.4301 (304).
Product wetted seals: . . . . . . . . . . . .EPDM USP class 6.
Finish: . . . . . . . . . . . . . . . . . . . . . .Bright (Ra 0.5).


Technical data

Max. inlet pressure: . . . . . . . . . . . . .400 kPa (4 bar).
Temperature range: . . . . . . . . . . . . . .-10C to +120C (EPDM).
Flushed shaft seal (FSS):
Water pressure inlet: . . . . . . . . . . . . .max. 100 kpa (1 bar).
Water consumption: . . . . . . . . . . . . .0.25 -0.5 l/min.
 
Connections for FSS:
R 1/8" (BSP) external thread.

Motor
Foot-flanged motor according to the IEC metric standard (EFF II), 2 poles = 3000/3600 rpm. at 50/60 Hz, IP 55 (with drain hole with labyrinth plug), insulation class F.
 
Voltage and frequency
3 ~, 50 Hz, 220-240V Δ/380-420VY ≤ 4 kW
3 ~, 60 Hz, 250-280V Δ/440-480VY ≤ 4.6 kW
3 ~, 50 Hz, 380-420V Δ/660-690VY ≥ 5.5 kW
3 ~, 60 Hz, 440-480VΔ ≥6.4 kW
 
Motor sizes
50 Hz:1.1, 1.5, 2.2, 3, 4, 5.5, 7.5, 11, 15, 18.5, 22 kW
60 Hz:1.3, 1.75, 2.5, 3.5, 4.6, 6.4, 8.6, 12.5, 17, 21, 25 kW.
 
NOTE!
When used with frequency converter the 22 kW motor only has 20kW effect.
 
Warranty
Extended 3-years warranty on the SolidC UltraPure Centrifugal Pump range. The warranty covers all non wear parts on the condition that genuine Alfa Laval Spare Parts are used.
 
Solid C UP Page 2
Solid C UP page 3
Options
A. Impeller with reduced diameter.
B. Motor for other voltage and/or frequency.
C. 1500 rpm. motor.
D. Flushed shaft seal.
E. Product wetted seals of Fluorinated rubber (FPM) or FEP.
F. Pump with shroud.
G. Pump without legs.
H. 0 outlet, see drawing below.
I. No Drain.
J. Finish product wetted surface Ra 0.8 μm.
K. Finish product wetted surface Ra 0.5 μm (electropolished).
- The final surface value will change after electropolishing.
L. Surface finish certificate.
M. SIP to 140C.
SCUP2
 
Standard documentation package:
- 3.1 certificate according to EN10204
- FDA certificate of conformity for product wetted elastomers.
- USP class 6 certificate of conformity - EPDM only
- Pump performance test certificate
 
Ordering
Please state the following when ordering:
- Pumpsize.
- Connections.
- Impeller diameter.
- Motor size.
- Voltage and frequency.
- Flow, pressure and temperature.
- Density and viscosity of the product.
- Options.
 
Note!
For further details, see also IM 70821.
This product has EHEDG certification
Some of our Suppliers
                                                                                                                    
Web Design Birmingham and Search Engine Optimisation (SEO) developed by EvolveNet